Добрый день, уважаемые связисты!
Не могу найти ошибку в маршрутизации, при наборе "0", затем номер абонента, АТС должна выходить на транк потока E1 в сторону другого Hipatha. Когда набираю "0" на цифровом аппарате выскакивает надпись "СЕЙЧАС НЕДОСТУПЕН". Подскажите, пожалуйста, что не так...
| LRTE = 27 NAME = MES (NEUTRAL) LSVC = ALL |
| DNNO = 77 PDNNO = 77 DESTNO = 77 |
| ROUTOPT = NO REROUT = YES PLB = YES FWDBL = NO |
| DTMFCNV = FIX DTMFDSP = WITHOUT DTMFTEXT = |
| DTMFPULS = PP300 BUGS = LIN ROUTATT = NO MAINGRP = 10 |
| EMCYRTT = NO CONFTONE = NO RERINGRP = NO RTENO = 10 |
| INFO = |
| NOPRCFWD = NO |
| NITO = NO |
| CLNAMEDL = NO |
| FWDSWTCH = NO |
| LINFEMER = NO |
| NOINTRTE = NO |
+-----------------------------------------------------------------+
| TGRP = 5 LDAT MEC (NEUTRAL) SUBGROUP = 7 |
+-----------------------------------------------------------------+

| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 11 | 1 NPI UNKNOWN |
| | 2 TON UNKNOWN |
| | 3 ECHO 1 |
| | 4 END |
+--------+----------------------------------------------+
|INFO:******* |
+-------------------------------------------------------+

+------------------------------------------------------------------------------+
| LROUTE = 27 LDPLN NAME = MES SERVICE = ALL |
| TYPE = LCR DNNO OF ROUTE = 77 |
| SERVICE INFO = |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| | | | | | SCHEDULE | CARRIER | | | |
|LRTEL | LVAL|TGRP | ODR|LAUTH| ABCDEFGH | ZONE| LATTR | LDSRT|COTIDX |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| 1| 1| 5| 11| 1, 2| ******** | 1 EMPTY| NONE | | 0 |
+------------------------------------------------------------------------------+

+----+----------------------------------------------------------------+-----+
|LCOS| LAUTH |COPIN|
| V | 1 2 3 4 5 6 | |
| |1234567890123456789012345678901234567890123456789 012345678901234| |
| |>SERVICE INFORMATION | |
+----+----+----|----+----|----+----|----+----|----+----|----+----|----+-----+
| 1|................................................ ................| 0 |
| |>LOCAL | |
| 2|....X..X........................................ ................| 0 |
| |>GOROD 9 | |
| 3|....X..XX....................................... ................| 0 |
| |>GOROD 98 | |
| 4|....X..XXX...................................... ................| 0 |
| |>GOROD 9810 | |
| 5|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX| 0 |
| |>ALL LAUTH | |
| 6|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXX....| 0 |
| |>MES | |
| 10|............................................... .................| 0 |
| |>* | |
+----+----------------------------------------------------------------+-----+

+--------------+-------------------------------------------------+
| | |
| DIPLNUM: 0| |
| LDPNO : 4| LDP : 0 |
| | SPC : 22 |
| | FDSFIELD : 0 SDSFIELD : 0 PINDP : N |
+------+-------+-------------------------------------------------+
| DPLN | LROUTE| LAUTH |
|------+-------+-------------------------------------------------+
| 0 | 27 | 1 |
| 1 | 27 | 1 |
| 2 | 27 | 1 |
| 3 | 27 | 1 |
| 4 | 27 | 1 |
| 5 | 27 | 1 |
| 6 | 27 | 1 |
| 7 | 27 | 1 |
| 8 | 27 | 1 |
| 9 | 27 | 1 |
| 10 | 27 | 1 |
| 11 | 27 | 1 |
| 12 | 27 | 1 |
| 13 | 27 | 1 |
| 14 | 27 | 1 |
| 15 | 27 | 1 |
+--------------+-------------------------------------------------+

+------------------------------- FORMAT = L -----------------------------------+
| TGRP NUMBER : 5 TGRP NAME : MEC MAXIMUM NO. : 30 |
| CHARCON : NEUTRAL |
| SUBGROUP NO.: 7 DEVICE TYPE : S2COD TRACENO : 0 |
| SEARCH MODE : CIRCULAR ACD THRESHOLD : * |
| NUMBER OF ASSOCIATED ROUTES : 1 PRIORITY : 1 |
| TDDRFLAG : ON TDDRTHRESHOLD: 2 SOURCEGROUPIDX : 1 |
| GDTRRULE : 0 ACDPMGRP : 0 |
| THE FOLLOWING TRUNKS (LTG-LTU-SLOT-CCT) HAVE BEEN ALLOCATED: |
+------------------------------------------------------------------------------+
| 1- 1- 79-0 1 | 1- 1- 79-0 2 | 1- 1- 79-0 3 |
| 1- 1- 79-0 4 | 1- 1- 79-0 5 | 1- 1- 79-0 6 |
| 1- 1- 79-0 7 | 1- 1- 79-0 8 | 1- 1- 79-0 9 |
| 1- 1- 79-0 10 | | |
+------------------------------------------------------------------------------+

+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2COD PEN = 1-01-079-0 TGRP = 5 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = Y SRCHMODE = CIR |
| COTNO = 5 COPNO = 5 DPLN = 0 |
| ITR = 1 COS = 83 LCOSV = 6 |
| LCOSD = 1 CCT = MEC DESTNO = 0 |
| SEGMENT = 1 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = CO |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 10 SATCOUNT = MANY NNO = 9 |
| ALARMNO = 2 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 5 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = SECLEVEL = TRADITIO |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 0 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = DMCSEC = VNNO = |
| SVCDOM = |
| BCHAN = 1 && 10 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 10

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-LTUW---------SG 1 LTU 1 --------------------- READY
** .LTG 1.LTU 1.079 DIUT2-E1 A Q2226-X200 READY
CCT LINE STNO SI BUS TYPE
000 1753 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
002 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
003 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
004 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
005 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
006 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
007 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
008 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
009 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
010 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
011 NO CONN
012 NO CONN
013 NO CONN
014 NO CONN
015 NO CONN
016 NO CONN
017 NO CONN
018 NO CONN
019 NO CONN
020 NO CONN
021 NO CONN
022 NO CONN
023 NO CONN
024 NO CONN
025 NO CONN
026 NO CONN
027 NO CONN
028 NO CONN
029 NO CONN
030 NO CONN
CCT LINE STNO SI BUS TYPE
001 1754 NOGEN

WABE на 0 надо. И после набора 0 ничего не должно набираться?

WABE на 0 есть, значение CO, после 0 только номер абонента, то есть набираю 0 и он не должен отправляться, а номер уже в поток.

В таком случае в LODR=11 должно быть ECHO=2, а не ECHO=1

По LODR ошибку заметил тоже, поменял его на 12, спасибо, но это не решило проблемы:
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 12 | 1 NPI UNKNOWN |
| | 2 TON UNKNOWN |
| | 3 ECHO 2 |
| | 4 END |
+--------+----------------------------------------------+
|INFO:******* |
+-------------------------------------------------------+

Покажите для маршрута 27
REG-RICHT
REG-LDAT
REG-LODR
REG-LDPLN

и ещё

для этого направления сделайте свой LCOSV

или поменяйте в транке LCOSV=5

LCOSV=5 ПОМЕНЯЛ, вот реги:
ADD-RICHT:LRTENEW,27,ALL,"MES ",
5,77,,,
FIX,,"",PP300,,,77,,NO,
NO,"",77,
NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO ;


ADD-LDAT:27,ALL,1,,5,12,1&2
,
,1,EMPTY,
NONE,
,4,,,,
,,,
,,,,,;


ADD-LODR:12,,,,NPI,UNKNOWN ,UNKNOWN ;
ADD-LODR:12,,,,ECHO,2;
ADD-LODR:12,,,,END;
ADD-LODR:12,,,
"******";


ADD-LDPLN:LCRPATT,0,0,
,
27

,,,
1,
,,,N;

Неправильно написан LDPLN
ADD-LDPLN:LCRPATT,0,0-X,,27,,,1,,,,N;

Но LAUTH=1 и 2 у Вас присутствует только в 5 и 6 LCOSV

Ok.

В любом случае -большое спасибо Вам, masviss, направление задали - буду изучать и работать.

LDPLN исправил LDP=0-X;
LAUTH=1 и 2, прописал во всех LCOSV.
Но ситуация так и не изменилась...:confused:

CHA-TDCSU:PEN=1-1-79-0,ITR=0,DEV=S2COD,BCGR=1;

CHA-TDCSU:PEN=1-1-79-0,ITR=0,DEV=S2COD,BCGR=1;
H500: AMO TDCSU STARTED
H03: BCGR 1 AT PEN 1-01-079-0 CHANGED

AMO-TDCSU-111 DIGITAL TRUNKS
CHANGE COMPLETED;


но аппарат не меняет своего мнения(

DIS-SBCSU:номер;

----------------------------- USER DATA ----------------------------------------
STNO =4350 OPT =OPTI COS1 =9 DPLN =0
MAINO =4350 CONN =DIR COS2 =9 ITR =1
PEN =1- 1- 37- 1 LCOSV1 =6 COSX =0
INS =Y ASYNCT =500 LCOSV2 =6
SSTNO =N PERMACT = LCOSD1 =1 CBKBMAX =5
TRACE =N EXTBUS = LCOSD2 =1 RCBKB =N
ALARMNO =0 DFSVCANA= SPDI =0 RCBKNA =N
HMUSIC =0 FLASH = SPDC1 = CBKNAMB =Y
PMIDX =0 SPDC2 =
SECR =N DIGNODIS=N DSSTNA =N COMGRP =0
STD =8 CALLOG =ALL DSSTNB =Y TEXTSEL =RUSSCYR

REP =2 OPTICOM =N OPTIUSB :1 VPI =
IDCR =N OPTICA = OPTIS0A :1 VCI =
APPM =N OPTIDA = OPTISPA :0 PATTERN =
OPTIUP0E:0 OPTIABA :0

DCFWBUSY=N HEADSET =N APMOBUSR=N APICLASS=TSX
DNIDSP =N HSKEY =NORMAL IPCODEC = SECAPPL =0
DTMFBLK =N IPPASSW =
DTMFCTRD=N BASICSVC=
DVCFIG =OPTIP500* TSI =1 SPROT = SOPTIDX =
API 2 DPROT = DOPTIDX =
FPROT = FOPTIDX =
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ----------------------
HTOS :N DND :N
HTOD :N VCP :Y TWLOGIN :N
HTOF :N CWT :Y
------------------- FEATURES AND GROUP MEMBERSHIPS ---------------------------
PUGR : ESSTN :
KEYSYS :N NOPTNO :
SRCGRP :(1 ) TCLASS : 0
HUNT CD :N
------------------- SUBSCRIBER ATTRIBUTES (AMO SDAT) -------------------------
NONE
------------------------------------------------------------------------------
*) OPTIPOINT500

DIS-REFTA;

А с противоположной стороны до Вас дозваниваются?

DIS-REFTA;
H500: AMO REFTA STARTED
+-------------------------------------------------------------------------+
| R E F E R E N C E C L O C K C I R C U I T S |
+--------------+---------+----------+---+------+------+------+-----+------+
| PEN | MODULE | DEVICE |PRI|ERROR |BLOCK |SUPP. |READY|SRCGRP|
| | | | | | | |BUT | |
| | | | | | | |ASYN.| |
+--------------+---------+----------+---+------+------+------+-----+------+
| 1- 1- 25- 0 | DIUT2 | S2COD | 70| 32000| N | | N | 1|
| 1- 2- 25- 0 | DIUT2 | S2COD | 80| 32000| N | | N | 1|
| 1- 1- 79- 0 | DIUT2 | S2COD | 90| 15200| N | X| N | 1|
+--------------+---------+----------+---+------+------+------+-----+------+

AMO-REFTA-111 REFERENCE CLOCK TABLE

С противоположной стороны вызов приходит.

После набора какой цифры появляется "СЕЙЧАС НЕДОСТУПЕН"?
Покажите
REG-LDPLN;

Сразу после набора "0" появляется эта надпись...

H500: AMO LDPLN STARTED
ADD-LDPLN:LCRPATT,0,0-X,
,
27

,,,
1&2,
,,,N;
ADD-LDPLN:LCRPATT,0,121,
,
9

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,9-8-W-10Z,
,
10

,,,
10,
,,,N;
ADD-LDPLN:LCRPATT,0,9-8-W-XXXXXXXXXX,
,
10

,,,
9,
,,,N;
ADD-LDPLN:LCRPATT,0,9-X,
,
9

,,,
8,
,,,N;

AMO-LDPLN-111 ADMINISTRATION LCR DIALPLAN

DIS-BUEND:5;

Trace monitor после набора "0" пишет - "CP DIGIT 0"

DIS-BUEND:5;
H500: AMO BUEND STARTED

+------------------------------- FORMAT = L -----------------------------------+
| TGRP NUMBER : 5 TGRP NAME : MEC MAXIMUM NO. : 30 |
| CHARCON : NEUTRAL |
| SUBGROUP NO.: 7 DEVICE TYPE : S2COD TRACENO : 0 |
| SEARCH MODE : CIRCULAR ACD THRESHOLD : * |
| NUMBER OF ASSOCIATED ROUTES : 1 PRIORITY : 1 |
| TDDRFLAG : ON TDDRTHRESHOLD: 2 SOURCEGROUPIDX : 1 |
| GDTRRULE : 0 ACDPMGRP : 0 |
| THE FOLLOWING TRUNKS (LTG-LTU-SLOT-CCT) HAVE BEEN ALLOCATED: |
+------------------------------------------------------------------------------+
| 1- 1- 79-0 1 | 1- 1- 79-0 2 | 1- 1- 79-0 3 |
| 1- 1- 79-0 4 | 1- 1- 79-0 5 | 1- 1- 79-0 6 |
| 1- 1- 79-0 7 | 1- 1- 79-0 8 | 1- 1- 79-0 9 |
| 1- 1- 79-0 10 | | |
+------------------------------------------------------------------------------+

CHA-SBCSU:STNO=4350,ITR=0; сделать набор
DIS-WABE:GEN,0;

CHA-SBCSU:STNO=4350,ITR=0;
H500: AMO SBCSU STARTED
H07: 4350 STATION DATA CHANGED

AMO-SBCSU-111 STATION AND S0-BUS CONFIGURATION OF SWITCHING UNIT
CHANGE COMPLETED;
<DIS-WABE:GEN,0;
DIS-WABE:GEN,0;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 0 |. .**** ..*** **... ..... .*| CO | |
------------------------------------------------------------------------------

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DISPLAY COMPLETED;


всё в том же состоянии :(

DIS-WABE:GEN,0&&0999;

DIS-WABE:GEN,0&&0999;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 0 |. .**** ..*** **... ..... .*| CO | |
------------------------------------------------------------------------------

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DISPLAY COMPLETED;

REG-SDAT:4350;

С аналоговыми и дектом та же история...
H500: AMO SDAT STARTED
CHANGE-SDAT:4350,DATA1,111,,,
,,,,,
,,,,,,
,, ,,TRADITIO;

AMO-SDAT -111 ADMINISTRATION OF SUBSCRIBER ATTRIBUTES AND DATA

Сделайте

DEL-LDPLN:LCRPATT,0,0-X;
DEL-LDAT:LROUTE,27,ALL;
DEL-RICHT:LRTE,27;
ADD-RICHT:LRTENEW,28,ALL,"MES-2",5,178,,NO,,,,,,,,,NO,NO,,0,NEUTRAL,NO,NO,NO,NO,NO ,NO,NO,NO;
ADD-LDAT:28,ALL,1,,5,12,1,,1,EMPTY,NONE,,4,,,,,,,,,,,, ;
ADD-LDPLN:LCRPATT,0,0-X,,28,,,1,,,,N;

и наберите номер

Обратите внимание на исправленный RICHT

Всё тоже самое, ничего не изменилось, на всех телефонах.

DIS-SDSU:ALL,,PEN,PER3,1,1,79,0;

MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-LTUW---------SG 1 LTU 1 --------------------- READY
** .LTG 1.LTU 1.079 DIUT2-E1 A Q2226-X200 READY
CCT LINE STNO SI BUS TYPE
000 1753 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
002 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
003 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
004 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
005 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
006 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
007 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
008 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
009 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
010 NETWORK SUBUNIT . TMD CO ISDN READY
(ALT_ROUT: N) (S2COD )
LINE: 1753 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY
011 NO CONN
012 NO CONN
013 NO CONN
014 NO CONN
015 NO CONN
016 NO CONN
017 NO CONN
018 NO CONN
019 NO CONN
020 NO CONN
021 NO CONN
022 NO CONN
023 NO CONN
024 NO CONN
025 NO CONN
026 NO CONN
027 NO CONN
028 NO CONN
029 NO CONN
030 NO CONN

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT

Какая последовательность набора?(Что набираете, например, 0-3345)
После набора 0 что-нибудь ждете(например, ответ станции)?

Сначала "0" затем номер "3397", но номер не дает набрать. Нет не жду, станция сразу даёт ответ - "занято".

Сделайте REG-WABE; и выложите в виде zip-файла

Вот...:

Всё тоже самое, ничего не изменилось, на всех телефонах.
ТС прошу обратить внимание, что ITR поменяли на определенном номере, и проверку надо делать только с этого номера:
CHA-SBCSU:STNO=4350,ITR=0; сделать набор
DIS-WABE:GEN,0;

И еще для теста можно включить весь поток е1 с обеих сторон?

Набирал только с этого номера, с остальных (аналог, дект) для теста строго, про поток завтра попробую пролонгировать этот вопрос.
Команда KNMAT может влиять на набор номера в данном случае, я так понимаю, что ей добавляются, удаляются цифры для набора номера?
Вот:
DIS-KNMAT;
H500: AMO KNMAT STARTED
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = ISDN, LEVEL = 0
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
100 | 8 | D |ALL | 0 | 0
100 | ROW | A |ALL | 0 | 121
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = PRIVATE, LEVEL = 0
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
100 | 8 | D |- | - | -
---------------------------------------------------------------------------
NODE MATRIX FOR NPI = UNKNOWN, LEVEL = 0
---------------------------------------------------------------------------
ONNO /|DNNO /|CONN|MODCON| NUMEXT | NUMRED
ONNOL |DNNOL | | | |
------+------+----+------+------------------------+------------------------
100 | 8 | D |- | - | -
------+------+----+------+------------------------+------------------------
111 | 8 | A |ALL | - | 121
111 | ROW | A |ALL | - | 121
------+------+----+------+------------------------+------------------------

AMO-KNMAT-111 NODE DATA FOR NETWORKING
DISPLAY COMPLETED;
<REG-WABE;
REG-WABE;
H500: AMO WABE STARTED

KNMAT - удалил все записи, не помогло.

Eще раз
DIS-TDCSU:1-1-79-0;

Доброе утро!
DIS-TDCSU:1-1-79-0;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2COD PEN = 1-01-079-0 TGRP = 5 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = Y SRCHMODE = CIR |
| COTNO = 5 COPNO = 5 DPLN = 0 |
| ITR = 0 COS = 83 LCOSV = 6 |
| LCOSD = 1 CCT = MEC DESTNO = 0 |
| SEGMENT = 1 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = CO |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 10 SATCOUNT = MANY NNO = 9 |
| ALARMNO = 2 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 5 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = SECLEVEL = TRADITIO |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 0 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = DMCSEC = VNNO = |
| SVCDOM = |
| BCHAN = 1 && 10 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 10

Хорошо.
Измените LCOSV1 и 2 у абонента 4350 = 5.
И
CHA-TDCSU:PEN=1-1-79-0,LCOSV=5,DEV=S2COD,BCGR=1;

Сделайте набор.

Безрезультатно, к сожалению.

Покажите
DIS-APS:,PSGL,Y0*;

DIS-APS:,PSGL,Y0*;
H500: AMO APS STARTED
ADINIT STARTED
PROGRAM SYSTEM : Y0-EO0YC
VERSION NUMBER : 10
CORRECTION VERSION NUMBER : 003
PART NUMBER : P30252N4604BH7601|V4 R4.1.76
PROGRAM SYSTEM WITH CODE SUBSYSTEMS
INTERFACE VERSION:
PROGRAM SYSTEM DOES NOT CONTAIN ANY INTERFACE VERSIONS

DIR SUBSYSTEM | | OMF SUBSYSTEM
-----------------------+-+-----------------------
ZMITSC00.Y0-EM0.10.001 |*|ZMITSC00.Y7-PMT.10.001

ADINIT COMPLETED
STATUS = H'0000
AMO-APS -111 SOFTWARE LOAD UPGRADE

DIS-FEASU;

H500: AMO FEASU STARTED
ACTIVATED FEATURES

CRITM SPDC SPDI HTVCE HTFAX HTDTE OVR FRKN
NIGHT COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP ICPTDID
HOTRCL DND VARCONF SNR RKNOVR CBK DSS SPLIT
ONHKTRNS PU SER RNG SYNCANN LCRET POSTBUSY POSTFREE
RELOCATE HTNW PININT TIMEDREM ATTR CPS INCPRIO CALOGOPT
DIRCPCKP CLIP MOBHFA

DEACTIVATED FEATURES

LDME TRACE RSVCO DDTES ISTR NOCHRG WTATND TRACCO
LEDSIGN VMSDP RELCON RERING AUTOV EMOVR EMRLS DCBB
DCBNOA CDRINH CDRIC CDROGNW CDROGTR DISCHINH DISCHNW DISCHTR
VOICO PINNW ECFW XFBACALL XFBADIAL CDRE DCPA NCT
RCCB MLPP CDRACC SMARTCRD SILMON

AMO-FEASU-111 CUSTOMER FEATURE LIST

Сделайте еще раз
DEL-LDPLN:LCRPATT,0,0-X;
DEL-LDAT:LROUTE,28,ALL;
DEL-RICHT:LRTE,28;

ADD-RICHT:LRTENEW,28,ALL,"MES-2",5,1-1-178,,NO;
ADD-LDAT:28,ALL,1,,5,12,1,,1,EMPTY,NONE,,4,,,,,,,,,,,, ;
ADD-LDPLN:LCRPATT,0,0-XXXX,,28,,,1,,,,N;

Покажите
REG-COP:5;
REG-COT:5;
REG-COSSU:COS,83;
REG-LODR:12;

Удалил, добавил:
DEL-LDPLN:LCRPATT,0,0-X;
DEL-LDAT:LROUTE,28,ALL;
DEL-RICHT:LRTE,28;

ADD-RICHT:LRTENEW,28,ALL,"MES-2",5,1-1-178,,NO;
ADD-LDAT:28,ALL,1,,5,12,1,,1,EMPTY,NONE,,4,,,,,,,,,,,, ;
ADD-LDPLN:LCRPATT,0,0-XXXX,,28,,,1,,,,N;

Но ничего не изменилось...всё тот же ответ станции после "0" сразу. Ничего донабрать не даёт.

А на дисплее, что пишет?

Покажите
REG-COP:5;
REG-COT:5;
REG-COSSU:COS,83;
REG-LODR:12;

REG-COP:5;
H500: AMO COP STARTED
ADD-COP:5,TIE&ANIW&ANIC,TA,TA;
CHANGE-COP:5,COPADD,,,,INDEP,
"PROBA";

AMO-COP -111 CLASS OF PARAMETER FOR DEVICE HANDLER
REGENERATE COMPLETED;
<REG-COT:5;
REG-COT:5;
H500: AMO COT STARTED
ADD-COT: 5,XFER&ANS&CEBC&TIE&CBBN&CBFN&TIEI&BLOC&
PROV&NLCR&DFNN&CFOS&CFVA&LINO&ANIC&DTNE;
CHANGE-COT:5,COTADD,,INDEP,
"ISDN";

AMO-COT -111 CLASS OF TRUNK FOR CALL PROCESSING
REGENERATE COMPLETED;
<REG-COSSU:COS,83;
REG-COSSU:COS,83;
H500: AMO COSSU STARTED
ADD-COSSU:,83,,,,,,,,"ISDN NA MES";
CHA-COSSU:COS,83,TA&TNOTCR&VCE;
CHA-COSSU:COS,83,,NOCO&NOTIE;
CHA-COSSU:COS,83,,,NOCO&NOTIE;

AMO-COSSU-111 CLASSES OF SERVICE
REGENERATE COMPLETED;
<REG-LODR:12;
REG-LODR:12;
H500: AMO LODR STARTED
ADD-LODR:12,,,,NPI,UNKNOWN ,UNKNOWN ;
ADD-LODR:12,,,,ECHO,2;
ADD-LODR:12,,,,END;
ADD-LODR:12,,,
"KAMENSK1";

AMO-LODR -111 ADMINISTRATION OF LCR OUTDIAL RULES

На дисплее всё та же надпись "СЕЙЧАС НЕДОСТУПЕН".

Напишите адрес Вашей приватной почты.

Отправил в личку.

Cделайте
ADD-COP:28,,TA,TA;

ADD-COT:28,RCL&ANS&CEBC&TIE&CBBN&CBFN&ITRN&PROV&LWNC&NLCR&TSCS&NTON;

ADD-COSSU:,28,,,,,,,,"TRUNK";
CHA-COSSU:COS,28,TA&TNOTCR&VCE&FWDNWK&TTT&FWDEXT;

CHA-TDCSU:PEN=1-1-79-0,COT=28,COP=28,COS=28,DEV=S2COD,BCGR=1;

Выполнил, результат тот же...

H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = S2COD PEN = 1-01-079-0 TGRP = 5 |
|---------------------------------------------------------------------------|
| PROTVAR = ETSI INS = Y SRCHMODE = CIR |
| COTNO = 28 COPNO = 28 DPLN = 0 |
| ITR = 0 COS = 28 LCOSV = 5 |
| LCOSD = 1 CCT = MEC DESTNO = 0 |
| SEGMENT = 1 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = CO |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 10 SATCOUNT = MANY NNO = 9 |
| ALARMNO = 2 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 28 FWDX = 1 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = SECLEVEL = TRADITIO |
|---------------------------------------------------------------------------|
| BCNEG = N BCGR = 1 LWPAR = 0 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = DMCSEC = VNNO = |
| SVCDOM = |
| BCHAN = 1 && 10 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 10

Добрый день!
В TDCSU сделай LCOSV = 1.

День добрый. С каким хайпасом вяжете поток? на том хайпасе какой протокол?

Добрый день, это с противоположной стороны настройка HP

ADD-BUEND:20,"1-PS-ISETY_126 ",30,0,*,1,ON,0,0,NEUTRAL;
ADD-TDCSU:NEW,1-02-025-1,99,99,0,0,99,10,1,"1-PS-ISETY ",70,ETSI,1,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,M ANY,33,0,1,1,EMPTY,1,10,N,,,,,,16,8,1,10,,EC&G711&G729AOPT,"",20,CIR,N,TRADITIO,S2CONN,1&&9,N,1,1,0,0,0,0,0;
ADD-RICHT:LRTENEW,20,ALL,"1E1-PS-ISETY ",20,70,,,FIX,,"",PP300,,,70,,NO,NO,"",70,NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO;

<REGENERATE-LODR:ODR=11;
REGENERATE-LODR:ODR=11;
H500: AMO LODR STARTED
ADD-LODR:11,,,,NPI,UNKNOWN ,UNKNOWN ;
ADD-LODR:11,,,,ECHO,2;
ADD-LODR:11,,,,END;
ADD-LODR:11,,,
"M200-MP16";


ADD-LDAT:20,ALL,1,,20,11,1,,1,EMPTY,NONE,,4,,,,,,,,,,, ,;


ADD-WABE:126,,,TIE,N,,,,,,,,;
ADD-LDPLN:LCRPATT,0,126,,20,,,1,,,,N;




ADD-BUEND:27,"1-PS-KAMENSK_121 ",30,0,*,1,ON,0,0,NEUTRAL;

ADD-TDCSU:NEW,1-02-025-0,99,99,0,0,99,10,1,"PS-KAMENS121",78,ETSI,1,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,M ANY,33,0,1,1,EMPTY,1,10,N,,,,,,16,8,1,10,,EC&G711&G729AOPT,"",27,CIR,Y,TRADITIO,S2CONN,1&&10,N,1,1,0,0,0,0,0;

ADD-RICHT:LRTENEW,27,ALL,"1E1-PS-KAMENSKA",27,77,,,FIX,,"",PP300,,,77,,NO,NO,"",77,NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO;



ADD-LDAT:27,ALL,1,,27,11,1,,1,EMPTY,NONE,,4,,,,,,,,,,, ,;


ADD-WABE:121,,,TIE,N,,,,,,,,;

ADD-LDPLN:LCRPATT,0,121,,27,,,1,,,,N;

Ok

Проблема решена!
Криво стояла база, помогла перезаливка.
Огромное спасибо всем участникам дискуссии, отдельная благодарность masviss за потраченное время и неоценимую помощь в настройке и понимании!!!