Подскажите, как на HiPath 4000 прописывается номер узла?

Номер узла на HiPath 4000, записывается в ZAND. Сначала посмотрите чего у вас там прописано: DIS-ZAND:ALLDATA; параметр NODE,NODECD, Обычно, исходя из построения иерархических сетей станций номер, к примеру имеет вид :NODECD = 1-2-100 . Cм.доку...

Node number (until 3 levels) for unambiguous identification in network.
For further administration of NODENO use AMO TACSU, TDCSU, RICHT, and KNMAT and see these AMO-description, please.
Used for feature "stationnumber signalization for open numbering in network" or "prevention of network loops and unauthorized calls"
The Node number can contain max. 3 levels.
Form: <level2>-<level1>-<level0> (e.g. 1-2-3 or 3-15 or 222).
Levels which are not nominated get default value 0 (not a valid node number). So e.g. 3-15 means the complete NNO 0-3-15 and 222 means NNO 0-0-222. Change level0 to 0 is not allowed. Levels have to be filled from low to high (e.g. not allowed: 1-0-12 or 1-0-0).

Code of own node
Used for example for Feature Routeoptimization in network. This NODECD have to be entered as routing code in all other nodes.
(AMO WABE, AMO RICHT). Input of ****** cancels the NODECD.