Как установить патч в Meridian 1? И где их можно скачать?

Как установить патч в Meridian 1? И где их можно скачать?

Претендент на звание "вопрос года".

Installing Patches (<Rel. 25)

After a Software Upgrade or Install, don't forget to apply any Patches!

Locate the Asia Pacific P 3/CP 4 MDCS Update disk and put it in the drive.
Access LD 143 and enter: mdcs install f0 ap (F0=floppy drive zero) - follow the prompts.
In-Service Patch's may be printed in LD 22, at the REQ prompt enter ISSP

The printouts below show the process.

>ld 143
CCBR000
.mdcs install f0 ap
Install will deactivate and remove all patches from system memory,
and install new patches!!!
Do you want to proceed with the install (y/n)? [y] y

Printing current status of patches
----------------------------------
System has no loaded patches.
Deactivating all patches on system
----------------------------------
0 patches on system deactiveated.

Removing all patches from system memory
---------------------------------------
0 patches removed from memory.

Creating directory /u/mdcs
------------------------------
Creating directory /u/patch/pswv
------------------------------
Copying patch files from /f0/pins to /u/mdcs
--------------------------------------------

copy from /f0/pins/p13435_1.cp4 to /u/mdcs/p13435_1.cp4 -
6784 bytes copied.

copy from /f0/pins/p13794a1.cp4 to /u/mdcs/p13794a1.cp4 -
340 bytes copied.

copy from /f0/pins/p13794b1.cp4 to /u/mdcs/p13794b1.cp4 -
476 bytes copied.

Loading patch files in /u/mdcs
------------------------------
Loading patch from "/u/mdcs/p13435_1.cp4"
Patch handle is: 0
Loading patch from "/u/mdcs/p13794a1.cp4"
Patch handle is: 1
Loading patch from "/u/mdcs/p13794b1.cp4"
Patch handle is: 2
3 patches have been loaded.

Activating all loaded patches
-----------------------------
SPEEDCALL_LIST code at 0x4aa7116 will be patched to jump to 0xdbba092
Patch 0 has been activated successfully.

print_assert at 0x50bec34 will be patched to jump to 0xdbbbc30
print_assert_syslog at 0x50becc2 will be patched to jump to 0xdbbbc42
Patch 1 has been activated successfully.

itgmap_valueAtIndex at 0x50c1afe will be patched to jump to 0xdbbbe5e
Patch 2 has been activated successfully.

3 patches on system activated.
Copying patch files from /f0/poos to /u/mdcs
--------------------------------------------
Copying swname files from /f0/swname to /u/patch/reten
------------------------------------------------------
12 bytes copied.
INSTALL ROUTINE COMPLETED SUCCESSFULLY.
PLEASE REMEMBER TO REINSTALL PREVIOUSLY LOADED PATCHES (IF APPLICABLE)!!!
.****
>ld 22
PT2000

REQ issp

VERSION 2811
RELEASE 25
ISSUE 30 + MDCS01 AP00

PSWV VERSION: PSWV 53

IN-SERVICE PATCHES : 3
PAT# PRS PATCH REF # NAME DATE FILENAME
00 MP11358 mdcs_20nov2000 p3-cp4 11/02/04 p13435_1.cp4
01 MP11680 mdcs_21nov2000 CORE 11/02/04 p13794a1.cp4
02 MP11680 mdcs_21nov2000 CORE 11/02/04 p13794b1.cp4

REQ ****
OVL000



Load Patch procedure

UPDATE: If you have physical access to the CPPM card, you can avoid all the FTP fun and games, and copy the files locally!

Deplist:

Copy the patch file onto a RMD compact flash card (8.3 name), and place it in the CPPM front panel CF slot.
Then in LD 143, issue the command: mdp install /cf2/cppm75.zip (assuming you've named the file cppm75.zip).

It's also possible to copy the unzipped files to a directory on the compact flash card, eg SWLOAD.
In this case, use mdp install /cf2/swload to install them all at once.
There is no need to remove pre-installed patches first. This procedure also works for 7.5 systems.
mdp issp shows status of deplist patches on call server

Loadware:

Log into pdt on the call server (if in sec domain this is same account username and password)
Then type cd /cf2, type ll and you should see the loadware files (having previously copied them to the CF).
One file at a time, copy the loadware in with copy <filename> /u/loadware
Use lwload <filename> [all] and lwinst <handle> [all]
lwstat shows status of loadware patches on call server

1. Remove current Patches

SSH or rlogin into the call server (admin1/0000 or secure login).

Check if there are any patches already installed - on a new installation, there won't be.

Goto LD 143, type: mdp issp
If there are, to remove them type: mdp uninstall

2. FTP upload the new patch file

On the local PC, copy the patch file to the root directory c:\
Filename must be 8.3 (no longer than 8 characters)

Open a CMD prompt, change directory to root, enter: C:\>ftp

At the FTP prompt, enter: ftp>open <IP of call-server> (login with pdt2/Password)

Change the remote directory, type: ftp>cd /u/patch (check you ARE in the /u/patch directory with PWD)

Type: ftp>bin to set BINARY mode, then type: ftp>mput <filename.zip>, and enter "y" to confirm.
The file is sent to the call server. When the upload is complete, type: ftp>bye to exit the FTP program.

Refer to CS File Transfer Protocol for some additional FTP commands and information.
3. Install new patches

Log into a CS TTY, admin1/0000

Goto LD 143, type: mdp install /u/patch/<filename.zip>

If the patch file is found you will be prompted to press "" or "y" to proceed.
Watch the screen scroll, and wait for the folowing message!

299 patches on system activated.

PCH0153: Install routine completed successfully.

4. Check the installed patches, and confirm they are indeed installed.

Still in LD 143, type: mdp issp to list the installed patches (in-service PEPs):

.mdp issp

VERSION 4021
RELEASE 5
ISSUE 00 W +
DepList 1: core Issue: 02 (created: 2010-07-20 10:00:01 (est))

IN-SERVICE PEPS
PAT# PRS/CR PATCH REF # NAME DATE FILENAME SPECINS
000 Q01454085-02 ISS1:1OF1 p06006_1 22/09/2009 p06006_1.cpm NO
001 Q00349046 ISS1:1OF1 p17588_1 22/09/2009 p17588_1.cpm NO
002 Q01217796 ISS1:1OF1 p19348_1 22/09/2009 p19348_1.cpm NO
003 Q01446798-01 ISS6:1OF1 p22847_6 22/09/2009 p22847_6.cpm NO
004 Q01501706 ISS2:1OF1 p23027_2 22/09/2009 p23027_2.cpm NO
005 Q01725096 ISS2:1of1 p23200_2 22/09/2009 p23200_2.cpm NO
:
:
:
MDP>LAST SUCCESSFUL MDP REFRESH :2009-09-22 11:29:04(Local Time)
MDP>USING DEPLIST ZIP FILE DOWNLOADED :2010-07-29 08:18:20(est)

Претендент на звание "вопрос года".

jetc, включай форсаж, "жги" на взлетном режиме :D :D

Boris-KU

Пожалейте ТС, выкладывайте частями, может не осилить..;)

Где их скачать ? Вы хоть скажите тип АТС и версию софта.

И почему "патч" ? вы ищите какой-то конкретный патч или весь деплист для своего релиза?