Mihey
02.06.2011, 11:17
Meridian Small System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r06 dev2.53
Reset Reason: C0, 0 - Reset due to Power Up
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10150773 type: NT_STD
System ID: 10150773
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Single fibre expansion board #2 installed.
Ethernet MAC address: 00:00:75:4A:89:49
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.
*** To invoke install setup program from PCMCIA enter CONTROL-I ***
Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.
*** OS RESTART ***
Meridian 1 X11 System Software
Release : x112425
Created : Thu Jul 1 18:51:14 PDT 1999
Loaded : 2/6/11 11:02:02
Copyright(C) 1972-1997 Northern Telecom, Inc. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.
BUG6343: Unable to initialize drive. pDrv = 0x2009925c, task = tStartup, tid = 0x203373b8 , pc = 0x1011e3c4
BUG6343: Unable to initialize drive. pDrv = 0x2009925c, task = tStartup, tid = 0x203373b8 , pc = 0x1011e3f6
Initialize Network Interface.
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.
BUG7462 OS 0: WARNING "Patch Init"
[ Initialising Orbix Error handling ]
[ Constructing a new Proxy Factory Table ]
Unable to open /p/data/VERSION
Meridian 1 X11 System Software
Release : x112425
Created : Thu Jul 1 18:51:14 PDT 1999
Loaded : 2/6/11 11:02:18
Copyright(C) 1972-1997 Northern Telecom, Inc. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.
Initialize Network Interface.
Start SNMP agent
SNMP Agent: Unable to open view cfg file c:/p/data/view.cfg
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.
BUG7462 OS 0: WARNING "Patch Init"
PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009c322
0x202f784c (tRptD): (2/6/11 11:02:09.000) SRPT0730 OS 0: Cold Start
Release: x112425
Created: Thu Jul 1 18:51:14 PDT 1999
0x202f784c (tRptD): (2/6/11 11:02:09.000) PCH00313 Error initializing patch retention file
Make sure the disk is ok. Reten info may be out of date
[ Initialising Orbix Error handling ]
[ Constructing a new Proxy Factory Table ]
Unable to open /p/data/VERSION
Кей коды есть, софт есть, форматировать как и софт заливать примерно знаю - примерно, потому что года полтора назад последний раз делал.
Проблема в том что не дает зайти в фбаг, в меню утилит по ктрл-и дает, но не знаю как это может помочь :( Прошу совета.
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r06 dev2.53
Reset Reason: C0, 0 - Reset due to Power Up
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10150773 type: NT_STD
System ID: 10150773
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Single fibre expansion board #2 installed.
Ethernet MAC address: 00:00:75:4A:89:49
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.
*** To invoke install setup program from PCMCIA enter CONTROL-I ***
Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.
*** OS RESTART ***
Meridian 1 X11 System Software
Release : x112425
Created : Thu Jul 1 18:51:14 PDT 1999
Loaded : 2/6/11 11:02:02
Copyright(C) 1972-1997 Northern Telecom, Inc. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.
BUG6343: Unable to initialize drive. pDrv = 0x2009925c, task = tStartup, tid = 0x203373b8 , pc = 0x1011e3c4
BUG6343: Unable to initialize drive. pDrv = 0x2009925c, task = tStartup, tid = 0x203373b8 , pc = 0x1011e3f6
Initialize Network Interface.
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.
BUG7462 OS 0: WARNING "Patch Init"
[ Initialising Orbix Error handling ]
[ Constructing a new Proxy Factory Table ]
Unable to open /p/data/VERSION
Meridian 1 X11 System Software
Release : x112425
Created : Thu Jul 1 18:51:14 PDT 1999
Loaded : 2/6/11 11:02:18
Copyright(C) 1972-1997 Northern Telecom, Inc. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.
Initialize Network Interface.
Start SNMP agent
SNMP Agent: Unable to open view cfg file c:/p/data/view.cfg
Network Interface is up.
Host : PRIMARY_ENET
IP Address : 137.135.128.253
Sub-netmask : 255.255.255.0
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.
BUG7462 OS 0: WARNING "Patch Init"
PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009c322
0x202f784c (tRptD): (2/6/11 11:02:09.000) SRPT0730 OS 0: Cold Start
Release: x112425
Created: Thu Jul 1 18:51:14 PDT 1999
0x202f784c (tRptD): (2/6/11 11:02:09.000) PCH00313 Error initializing patch retention file
Make sure the disk is ok. Reten info may be out of date
[ Initialising Orbix Error handling ]
[ Constructing a new Proxy Factory Table ]
Unable to open /p/data/VERSION
Кей коды есть, софт есть, форматировать как и софт заливать примерно знаю - примерно, потому что года полтора назад последний раз делал.
Проблема в том что не дает зайти в фбаг, в меню утилит по ктрл-и дает, но не знаю как это может помочь :( Прошу совета.