Сегодня ночью с грохотом упал HSP: :(

CCED762 SWO: Graceful switch-over from side 0 to side 1 completed
Previous Graceful SWO: at 11/3/07 0:07:06

CCED764 LCS: Graceful Switchover. Call Processing Resumed at 00:05:59

SRPT041 LCS: Graceful switchover command successful.

SRPT131 CM: Primary client can't connect to the other side.

BUG2290 HB: HBWaitEtherRep - HB threshold exceeded.

SRPT021 LCS: hsp state changed from LcsHspStUp to LcsHspStDown.

Соответственно:

>ld 137
CIOD000
.stat hsp
LCS HSP STATE is DOWN
HSP LINK CARRIER: OK
Auto Negotiation: Enabled
Auto Negotiation Completed: YES
Actual Line Speed: 1000 Mbps
Actual Duplex Mode: Full Duplex

Ethernet (gei unit number 1):
Internet address: 127.2.0.2
Broadcast address: 127.255.255.255
Ethernet address: 00:c0:8b:09:cf:89
Netmask: 0xff000000; Subnetmask: 0xff000000
182964707 packets received; 182901482 packets sent
0 input errors; 0 output errors
0 collisions


>ld 135
CCED000
.stat cpu

cp 1 16 PASS -- ENBL

REDUNDANT HSPDOWN
DISK STATE = REDUNDANT
HEALTH = 24
VERSION = Jul 28 2005, 04:14:02
Side = 1, DRAM SIZE = 512 MBytes


cp 0 16 PASS -- STDBY

REDUNDANT HSPDOWN
DISK STATE = REDUNDANT
HEALTH = 24
VERSION = Jul 28 2005, 04:14:02
Side = 0, DRAM SIZE = 512 MBytes

Кабель проверил, вроде целый.
Вопрос собственно в том, как эту бяку поднять ибо вдумчивое курение документации пока ни к чему не привело.

Инитнуть оба...

Не хочется инитить. Может есть способ более правильный?
Впрочем, если ничего не придумаю попробую проинитить.

Возможно, поможет такой способ (выдержка из доки Large System Installation)

Making the system redundant
At this point, Core/Net 0 is ready to be synchronized with Core/Net 1.
Procedure 109
Making the system redundant
1 Attach the LAN 1 and LAN 2 cables to the CP PIV faceplate connectors
on Call Server 0 and Call Server 1.
2 Enter LD 135 and issue the JOIN command. The high speed pipe (HSP) status is now UP. This begins the synchronization of the Call Servers.

Увы, не поможет. Ладно, бум инитить.