Xman
12.09.2006, 10:03
M11C 4.5,карточка новая, ntvq01bb, fw 8.2
OTM 2.2 , не трансмитится конфиг, не пойму, в чём засада?

вторник, сентября 12, 2006, 09:50:44
Initializing the Node Properties file transfer process for...
...leader card with TN = 001
Checking if ITG card is busy
ITG card is ready for file transfer.
SNMP "set" failed.
Released the file transfer lock successfully.
Download of config.ini to card is in progress. Card TN = 001 and Current Time = Tue, Sep 12, 2006 : 09:50:46.
File transfer lock is available for this node.
Released the file transfer lock successfully.
File transfer could not be initiated. Card TN = 001.
Card Properties could not be transmitted to Card with TN=001.

Urri
12.09.2006, 10:33
IP-шник на карточке прописан командой setLeader?

Tema
12.09.2006, 10:38
Карточку не забыл выключить?
ld 32
.disi 1

Xman
12.09.2006, 10:41
Urri пишет
IP-шник на карточке прописан командой setLeader?

Да, конечно, всё вроде по процедуре делал.

Xman
12.09.2006, 10:47
Tema пишет
Карточку не забыл выключить?
ld 32
.disi 1

Выключал, disc 1.

Urri
12.09.2006, 10:51
макадрес прописал в ОТМ? Пинговать пробовал?

Xman
12.09.2006, 11:03
OTM карточку видит,что видно по логу, всё пингуется, макадрес в ITG Node configuration прописан, или где-нибудь ещё надо?

Urri
12.09.2006, 11:10
SNMP community не трогал?

Malex
12.09.2006, 11:15
Нода делается в ITG ISDN IP Trunk?
При ресете карты с консоли ничего "странного" не видно?
И еще глупый вопрос: софт на CF действительно от IP Trunk, а не IPL?

Xman
12.09.2006, 11:17
Изначально не трогал, но судя по "SNMP "set" failed." что-то криво, вот только где?

Urri
12.09.2006, 11:20
Еще один глупый вопрос. CompactFlash в карточке присутствует?

Malex
12.09.2006, 11:30
2 Urri
:)

Xman
12.09.2006, 11:37
Нода в ITG ISDN IP Trunk, флешка NTM405ABE6 (ver.3.01.60)
может софт криво залит..., конфиги уже ручками удалял, они всё равно нулевые, ноль эмоций.

вот загрузка, что там странного может быть?

MC Firmware Rls 8.2
8051XA Firmware Version 4.11 05 November 2003
(C) Nortel Inc. 2004
EPLD Version: 1.1
64K External RAM detected
8K DPRAM detected
All FPGAs are configured
No dongle detected

Bank 0 Checksum - B011H
SRAM test okay
SDRAM Addr test okay
SDRAM blank over
Early serial debug initialized











VxWorks System Boot


Copyright 1984-1998 Wind River Systems, Inc.





CPU: IXP1200
Version: 5.4
BSP version: 5.2
Creation date: Feb 24 2003, 11:03:32

Enter jkl to force boot to BootROM vxWorks prompt



auto-booting...


boot device : ata=
unit number : 1
processor number : 0
file name : /C:/exec
flags (f) : 0x0
other (o) : ixpMac

Attaching to ATA disk device... Found device : Cirrus CL-PD672x
0x3af7934 (tBoot): PC Card Detected: Socket 0
cisGet : pcCard recognized
PC Card Detected: Socket 1
cisGet : pcCard recognized
/C:/ - Volume is OK
3974276 + 463572 + 4580616
Starting at 0x1000...

Early serial debug initialized
sysHwInit2: Connect task-level exception handler
Setting tLogTask priority to 150
Found device : Cirrus CL-PD672x
cisGet : pcCard recognized
0x3affe64 (tRootTask): PC Card Detected: Socket 0
logTask: 2 log messages lost.
PC Card Detected: Socket 1
cisGet : pcCard recognized
ipMethodInit, gIPMethod = 2
IP Address from NVRAM: 10.18.1.83
IP Data in NVRAM Valid, Boot Line updated
IP Address:10.18.1.83
Gateway Address:10.18.1.81
Subnet Mask::fffffff0
Host Name: bootHost
Target Name: vxTarget
User: target
StartUp Script: /C:/etc/startup

MAC Address for Port 0 is : 00:15:9b:fd:89:1e
SysConf: uEng_intConnect to pktHandlingIsr.
0 symbols bound.
Load uCode from buffer Status : Return Success
Starting Microengines.
0x3affe64 (tRootTask): Loading MAC_21440...
0x3affe64 (tRootTask): mac21440Load: Init String[0] NULL: ixpMac
0x3affe64 (tRootTask): Loading MAC_21440...
0x3affe64 (tRootTask): MAC 21440 String : Processed all arugments
0x3affe64 (tRootTask): mac21440InitMem: Net Pool ID is 51311676
0x3affe64 (tRootTask): Done loading mac21440...
0x3affe64 (tRootTask): mac21440Start: Starting port 0
TLAN Port set to Auto-Negotiate Speed and Duplex Settings
Waiting For Carrier link to Return

MAC Address for Port 1 is : 00:15:9b:fd:89:1f
0x3affe64 (tRootTask): Loading MAC_21440...
0x3affe64 (tRootTask): mac21440Load: Init String[0] NULL: ixpMac
0x3affe64 (tRootTask): Loading MAC_21440...
0x3affe64 (tRootTask): MAC 21440 String : Processed all arugments
0x3affe64 (tRootTask): mac21440InitMem: Net Pool ID is 49459104
0x3affe64 (tRootTask): Done loading mac21440...
0x3affe64 (tRootTask): mac21440Start: Starting port 1
ELAN set to 10BaseT Operation
ELAN set to Half Duplex Operation
Waiting For Carrier link to Return
Attached TCP/IP interface to ixpMac unit 1
Attaching network interface lo0... done.
0x3affe64 (tRootTask): WARNING: mac21440MCastAddrAdd called. addr=0x3aff564
NFS client support not included.

Adding 10173 symbols for standalone.


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2000

CPU: IXP1200 . Processor #0.
Memory Size: 0x3b00000. BSP version IPT3.0/0.

/C:/ - Volume is OK

(ItgPatch): 3145728 byte memory partition created for patches



Creating File System ...

File (/C:/TABLE/DPTABLE.1) Created ....
File (/C:/TABLE/DPTABLE.2) Created ....
File (/C:/BOOTP/BOOTP.1) Created ....
File (/C:/BOOTP/BOOTP.2) Created ....
File (/C:/CONFIG/CONFIG1.INI) Created ....
File (/C:/CONFIG/CONFIG2.INI) Created ....
File (/C:/BOOTP/BOOTP.1) is empty
0x2bf2ac8 (SNMPAgent): Error retrieving config file info.
2006 9 12 09:42:57 (SNMP) :Completed addition of ITG MIB tree 1.3.6.1.4.1.562
2006 9 12 09:42:57 (COM) :Set defaultRouteGW: 0.0.0.0
2006 9 12 09:42:57 (COM) :NVRAM leader: BOOTP file NOT present


VxWorks login: 2006 9 12 09:42:58 (COM) :Sending BOOTP request: timeout 2800
0x3affe64 (tRootTask): MMsend called by appl 9 before Meridian Manager Init!
0x3affe64 (tRootTask): Setting dosFS Cache Update Interval to 0 Secs
2006 9 12 09:43:26 (COM) :ERROR No BOOTP response: No leaders found
2006 9 12 09:43:26 (COM) :ERROR !! could not get config info ERROR !!!
2006 9 12 09:43:26 (COM) : getting mgt lan ip for the card...
2006 9 12 09:43:27 (DIM) :Number of DSPs = 0
2006 9 12 09:43:27 (COM) :Current ESN5 Prefix is set to |100|
2006 9 12 09:43:27 (A07) : XA : - Spawn xaTask()
2006 9 12 09:43:27 (A07) : XA : - xaTask Spawned OK
2006 9 12 09:43:27 (A07) :Waiting for XA firmware version reply...
Telogy Software Version 8.1

DIM created successfully...
2006 9 12 09:43:28 (A07) :Received firmware version reply
2006 9 12 09:43:28 (DIM) :MXP environment is created
2006 9 12 09:43:28 (DIM) :Eeprom contents empty. Default number of DSPs = 8
2006 9 12 09:43:28 (DIM) :dimhw_init : DSP Type = C5421
2006 9 12 09:43:28 (ATPM) :ITG0404 - Empty dialing plan table
2006 9 12 09:43:28 (NMM) :tNMM running: Software version IPT3.01.60
2006 9 12 09:43:28 (NMM) :NMM received file data ERROR message from MAM
2006 9 12 09:43:28 (NMM) :sending fileXferOk message to task 4
2006 9 12 09:43:28 (NMM) :NMM received file data OK message from ATPM
2006 9 12 09:43:28 (NMM) :NMM received file backup ERROR message from MAM
2006 9 12 09:43:28 (COM) :Current ESN5 Prefix is set to |100|
2006 9 12 09:43:28 (SNMP) :DSP str is R8.01
2006 9 12 09:43:28 (NMM) :sending Module Status message: module 15: status 0
2006 9 12 09:43:28 (NMM) :Task # 15 : status = 0
2006 9 12 09:43:28 (SNMP) :dummy: setting up alarm struc
2006 9 12 09:43:28 (SNMP) :Calling snmpTrap
2006 9 12 09:43:28 (A07) :Last Reset Reason: Unknown

2006 9 12 09:43:29 (COM) :Task tSockReuse initialised okay

2006 9 12 09:43:29 (COM) :ITG0100, ITG card bootup is successful
2006 9 12 09:47:49 (MNT) :Detected a Missing Non-Critical Task: "tCardRegister" (02ade97c)
2006 9 12 09:51:21 (SNMP) :services_set: Setting file Lock
2006 9 12 09:51:21 (SNMP) :services_set: Clear file Lock
2006 9 12 09:51:21 (SNMP) :services_set: Setting file Lock
2006 9 12 09:51:22 (SNMP) :services_set: Clear file Lock

Urri
12.09.2006, 12:09
Маска подозрительная. Карточка и сам комп с ОТМ о одной подсети?

Xman
12.09.2006, 12:44
Urri пишет
Маска подозрительная. Карточка и сам комп с ОТМ о одной подсети?

Почему подозрительная ,для ELAN 255.255.255.240, подсеточка рутится на другую, в которой стоит ОТМ.

Urri
12.09.2006, 13:08
А с роутером все нормально?

Xman
12.09.2006, 13:52
Urri пишет
А с роутером все нормально?

Поменял IPшники, переткнул всё в одну сетку с ОТМ, тоже самое...

Urri
12.09.2006, 14:58
swVersionShow что говорит?

Xman
12.09.2006, 15:14
Urri пишет
swVersionShow что говорит?

ITG> swVersionShow
Installed Image: IPT IPT-3.01.60_01_31_2005.6893 (ITG SA) - Monday January 31 11:37:05 EST 2005
value = 100 = 0x64 = 'd'

Urri
12.09.2006, 15:43
:confused:
по идее должно работать без вопросов

bad
12.09.2006, 16:12
дурацкий совет:
переставь софт.

Xman
12.09.2006, 17:09
Из ОТМ не проходит, по той-же причине, как ещё его можно переставить?

bad
12.09.2006, 17:12
вытащить карточку записать на нее софт и поставить обратно.

Xman
12.09.2006, 17:24
То есть, очистить флешку и положить туда файлик ipt30160.sa ?

lexad
12.09.2006, 17:36
Xman пишет
То есть, очистить флешку и положить туда файлик ipt30160.sa ?
Лучше, наверное, переменовать этов файл в эксек для начала

bad
12.09.2006, 17:37
нуда
в EXEC

Xman
13.09.2006, 09:52
Не помогло, подозреваю, что засада в OTM с SNMP community,
в документе 553-3001-363 есть такое:



Change the SNMP community name strings to control access to the IP Trunk
3.01 (and later) node. OTM uses the community name strings to refresh the
IP Trunk 3.01 (and later) node and card status and to control the transmitting
and retrieving of files for database synchronization.
Note: To retrieve the community names if forgotten, connect a TTY to
the IP trunk card maintenance port. Restart the IP trunk card. The IP
trunk card displays the community name on the TTY during startup.
The community name strings are not configured on the Security tab. They are
displayed as read-only for information purposes. See Figure 58 on page 338.

Только при рестарте я не вижу этих community names,где они там? И при System Update они в ITG ISDN IP Trunk тоже не меняются...
Ну посоветуйте теперь переставить ОТМ :)

Tema
13.09.2006, 14:32
Нет OTM'а под руками.. Точно не помню, но вроде names такие:
на чтение - public
на чтение/запись - private

Xman
13.09.2006, 16:09
В общем поставил я ОТМ на другую машину :)
...и всё заработало.
Всем спасибо!

Urri
13.09.2006, 17:46
Ох уж и загадочный, этот зверек ОТМ:)

Xman
14.09.2006, 11:15
Кстати вдогонку, кто-нибудь стыковал IPTrunk с циской или с мерой например?

bad
14.09.2006, 15:14
с циской не будет.
в поиск